Installation of ventilation systems

This is done for functional and aesthetic reasons. Installation of the working module at an angle is required to remove condensate that may appear during system operation. At an inclination of 2-3° to the side of the street, it appears naturally.
Also, the recuperator flange on the front cover has a different thickness at the top and bottom. Installation of the system at an angle allows you to take this into account. If there is an inclination of 2-3°, the flange of the recuperator tightly adheres to the inner wall. You get an effective and aesthetic ventilation system.

Yes of course. If the only possible mounting area is a window, then part of the glass is replaced with a sandwich panel. A hole is made in it for installing the recuperator. Inside the room, the ventilation system is placed under the ceiling with the help of fasteners.

The surface area does not affect the possibilities or quality of installation of the ventilation system. Drilling the mounting hole and placing the working module in the thickness of the wall takes place from inside the room. The only feature is that when installing the recuperator on the 4th floor and above, it is recommended to use a windproof cap.

We use diamond drilling technology. It allows you to make a hole of a given diameter without damaging the adjacent sections of the wall. A diamond drill can handle any material, including all types of brick, ceramic blocks and concrete.

No, the cost of installation is calculated separately for each room, taking into account its features. Some of them complicate the process and increase the price of services. Therefore, we cannot indicate the cost of installation in advance. If you want to orient yourself in the price, contact our manager.

The main criterion is the availability of the installation area for work. That is why a consultation with the manager is required to calculate the cost of the service. Most often, the reason for the complication and increase in the cost of installation are:

• Wall thickness, if it is more than 60 cm.
• Drilling in non-standard conditions.
• Impossibility of fixing the tool or drilling at a height.
• The presence of hidden networks and the need to find them.
• Necessity of routing the cable/box to the outlet.
• Carried tools to the 4th floor and higher due to the lack of a working elevator.

Domestic ventilation systems are recommended to be installed in residential premises where people spend a lot of time. For example, a living room or an office. Installation in the bedroom is also possible. The only detail – in this case, special attention is paid to the correct selection of the installation area. The comfort of people during rest depends on this.

No. PRANA domestic and semi-industrial ventilation systems are also installed in:

• offices;
• kindergartens and schools;
• temples;
• non-special purpose medical institutions;
• beauty salons;
• stores.

In rooms that, according to current state regulations, must be equipped with exhaust ventilation (bathroom, kitchen). In some cases, it is possible to install a recuperator in the kitchen. Conditions for this:

• the remoteness of the installation area from the stove, which will ensure the absence of fatty contamination of the system;
• sufficient amount of space to create proper air exchange in the room.

It is possible, but not desirable. There are a number of reasons for this:

• Reduction of efficiency. Warm air is concentrated in the upper part of the room. When it is taken in and removed, the heat exchanger stores part of this energy and transfers it to the supply air. So you save up to 96% of heat. If you place the recuperator in the lower part of the room, the temperature of the exhaust air will be lower. Accordingly, a smaller amount of heat will be transferred to the fresh incoming air.
• Discomfort. Taking into account the previous point, in the cold periods of the year, air of a lower temperature will be supplied to the premises. If the system is placed in the upper part of the wall, then the air flows are mixed and you will not feel discomfort. When installed in the lower part of the wall, air flows with a temperature lower than the air in the room will be directed at people.