The appearance of mold on the walls or windows is always an unpleasant surprise for the residents of the apartment. People make a lot of efforts to get rid of this unaesthetic and health-threatening problem, like using folk remedies, sometimes quite exotic, or treating the affected surface with special antibacterial agents.

However, without eliminating the main cause, it is not possible to destroy the mold. At the time when you get rid of the consequences, which is the visible part of the pollution, the residence remains potentially dangerous.

The main reasons for the appearance of mold on the walls

In residential and industrial premises, mold most often appears due to high humidity and insufficient ventilation. If you do not eliminate the main causes of the appearance of mold, dangerous black spots will appear in the room again and again.

Microscopic mold spores are dispersed in the air and ready to grow again as soon as the conditions are right. One square meter of mold can release billions of spores into the air per day.

Dangerous consequences of contact with mold

Spores of certain types of mold are extremely toxic and cause irreversible negative consequences for human health. The respiratory, cardiovascular, nervous, digestive and locomotor systems are affected. In addition, a 45% decrease in the average rate of air exchange increases the risk of allergic symptoms in a person by 2 times!

Children, the elderly, and people with weakened immune systems due to illness, chemotherapy or taking antibiotics are especially vulnerable to the negative effects of mold.

How to get rid of dangerous mold?

To get rid of mold once and for all, you only need to take two simple steps:

  1. Remove stains mechanically. For this, there are many antiseptics that can be bought at any hardware store.
  2. Eliminate the cause of the appearance of mold and fungus to prevent its further spread. We can offer the best solution – PRANA decentralized ventilation systems.

High-quality air exchange not only enriches the air with oxygen, but also creates the necessary air movement in the room. The PRANA recuperator normalizes the microclimate in the room, removes excess humidity, creates constant air convection, and thus, eliminating all prerequisites for the appearance of dampness, mold, excessive humidity and fungus!

Recuperators are recommended to be installed in rooms with plastic windows and a high level of humidity – to create a balanced and healthy microclimate.