The operation of most industrial facilities involves additional emissions of harmful substances, gases, dust, metal particles, excess moisture, and heat. That is why it is essential to ensure the installation of a high-quality industrial ventilation and heat recovery system in production premises of various types—one that can effectively remove air contaminated during the work process.
An industrial recuperator is a supply and exhaust ventilation system designed for large facilities or specific operating conditions. The PRANA catalog features the 250 and 340S models with copper heat exchangers and ventilation duct connection capabilities. The configuration is selected based on engineering calculations.
PRANA systems are installed wherever calculated supply and extraction of air from one or more zones is required. The solution depends on the building’s purpose, the number of occupants, work processes, as well as the area and height of the building.
Main application areas:
A single industrial-premises recuperator can service a separate zone or operate with a network of air ducts. The configuration is determined after an analysis of the facility.
*Except for operating rooms and premises with elevated sanitary requirements.
The system simultaneously extracts stale air and supplies fresh air, transferring energy between separated flows. PRANA’s copper heat exchanger reduces heat losses in winter and helps maintain coolness in summer.
When a facility requires high-performance ventilation, the industrial recuperator works in conjunction with air ducts. The project may also include filters, heaters (heating elements), or a silencer.
Industrial equipment is designed for larger air volumes and multiple zones. Heat recovery does not replace heating, cooling, or purification; rather, it reduces energy losses during air exchange.
An industrial recuperator is selected based on air exchange rates, air parameters, existing ventilation, and installation conditions. Floor area alone is not sufficient for the calculation.
Selection requires:
Based on this data, an engineer calculates the system and its components. An industrial air recuperator is intended for large facilities, with parameters tailored to the actual load.
Performance refers to the volume of supplied or extracted air per hour, measured in m³/h. It is calculated based on the facility’s parameters and operating mode.
PRANA 250 provides an air supply of up to 650 m³/h and extraction of up to 620 m³/h, while PRANA 340S provides up to 1100 and 1020 m³/h, respectively. Selection requires engineering calculations.
Configuration depends on air parameters, operating schedules, duct lengths, installation location, control options, and additional equipment.
PRANA 250 and 340S support independent flow control, programmable operation, “Passive” and “Minimum” modes, as well as “Ventilation” and “Sleep Timer” functions.
The “Mini-heating” and “Winter mode” functions are available for wall installation when infrared film is present. Additionally, heating elements can be installed for supplementary pre-heating of the supply air, controlled via the control unit.
PRANA solutions combine heat recovery, various installation options, and facility-specific adaptation.
Their key features include:
The maximum efficiency of PRANA 250 is 74%, and PRANA 340 is 78%. The system’s effectiveness also depends on design, installation, and maintenance.
PRANA 250 is suitable for moderate calculated air exchange, while PRANA 340S is designed for large premises and higher loads.
|
Model |
Application |
Supply / Extraction |
Efficiency |
Installation & Features |
|
PRANA 250 |
Industrial, commercial, and public facilities |
Up to 650 / 620 m³/h |
Up to 74% |
Combined installation, duct connection, programmable flow control |
|
PRANA 340S |
Factories, shopping centers, swimming pools, and large facilities |
Up to 1100 / 1020 m³/h |
Up to 78% |
Internal, wall-mounted, or combined installation, programmable control |
Noise levels and automation specifications are detailed in the documentation for the chosen configuration. The system is custom-assembled per project.
To order an industrial recuperator, provide our specialists with the facility parameters and ventilation requirements. Engineers will calculate the air exchange, select the model, automation system, and installation services.
The proposal preparation includes:
Industrial recuperator pricing depends on performance, configuration, automation, air ducts, and project complexity. All prices are calculated individually.
To order an industrial recuperator in Ukraine, submit an online request and attach the floor plan. The manufacturer will help calculate the solution, delivery, installation, and service. This is how you can order industrial recuperators in Ukraine with components tailored to your specific facility conditions.
Cost calculation