To consumers

The PRANA supply and exhaust ventilation system ensures the simultaneous movement of supply and exhaust air flows inside the copper heat exchanger. Divergent air flows through adjacent channels of the heat exchanger and do not mix.

Ventilation system (recuperator) does not replace space heating. The main task of ventilation is efficient air exchange of premises. The task of the heating system is to raise the air temperature. The recuperator helps to maintain a comfortable temperature in the room.

The PRANA household recuperator is connected to a standard 200 V 50 Hz mains supply and consumes from 4 to 91 W ＊ h, depending on the selected speed and operating mode.

In the process of living a person constantly releases moisture: breathing, hygiene measures, wet cleaning, washing. The recuperator provides effective removal of the fulfilled damp air from rooms that positively influences humidity of a room as a whole.

Traditional ventilation by opening windows wastes more than 30% of heat during heating. In the hot season, opening windows quickly heats the air in the room, which increases energy consumption for air conditioning to 80%.

Recuperative ventilation saves up to 96% of the energy resources associated with room ventilation 一 without opening windows and losing heat/coolness. In the copper heat exchanger there is an interchannel transfer of exhaust air temperature to fresh inflow. Therefore, fresh air is supplied to the room at a comfortable temperature and does not require additional heating or cooling.

Yes. When the recuperator lid is open with the engines switched off, there is an uncontrolled movement of air depending on the influence of other ventilation systems, the time of year, wind speed, etc.

For comfortable and safe operation of the recuperator in winter it is recommended to use «Winter mode» and «Mini-heating». With proper operation, the PRANA ventilation system can be used in the temperature range from -30 to +50 C.

• Countercurrent principle of operation: supply and exhaust work simultaneously. It allows you to install only 1 recuperator in the room;
• The copper heat exchanger has high thermal conductivity and provides high efficiency of the system at any time of the year;
• Easy control from the remote or mobile application;
• 5 speeds and useful operating modes allow you to adjust the optimal air exchange parameters;
• 24V motors operate reliably and safely;
• The «Separate engine control» function allows you to adjust the required supply and exhaust parameters;
• Wi-Fi connection allows you to control the recuperator from anywhere in the world.

If there are already visible marks of fungus and mold in the room 一 they must be removed mechanically in the first place.

PRANA recuperators eliminate the main causes of mold – excessive humidity and stagnation of air in the room. Effective air exchange significantly reduces the number of mold spores in the air, which prevents its recurrence.

The recuperator is installed in the outer wall of the building. The diamond drilling method arranging the mounting hole with an angle of 3-5 degrees towards the street for efficient drainage of condensate. A recuperator is installed in the mounting hole on the mounting foam or other sealant. The whole process of installing a household system takes up to 2 hours without breaking the repair.

The recuperator is selected by a company specialist based on the information provided by the customer: the plan of the premises, their volume and using purpose, the features of the building. To order a consultation and a design solution for ventilation, fill out the form.